Leather Fresh Dye Kit
This repair kit is ideal for repairing scratches, abrasions or slight fading on leather furniture or leather car seats.
Contents
- 1 x Leather Cleaner, 200 ml
- 1 x Sponge for cleaning
- 1 x Leather Cleaning Brush
- 1 x Degreaser, 150 ml
- 1 x Leather Sanding Pad
- 1 x Leather Fresh Dye, 150 ml
- 1 x Sponge for applying fresh dye
- 1 x Protective Glove
- 1 x Leather Protector, 150 ml
- 1 x Polishing Cloth
- 1 x Instruction flyer
Application
First, clean the leather thoroughly before refreshing the colour or the application of care products with our COLOURLOCK Mild Leather Cleaner. Cleaning prior to treatment prevents dirt sticking on the leather's surface during colour or care. The Leather Cleaner is provided in a foam dispenser bottle. Foams clean the leather more efficiently than liquid agents, the consumption is considerably smaller, and the leather does not become wet, which could otherwise lead to hardening after drying.
The Leather Cleaner gently cleans all kinds of nappa leather. Apply some foam on the Cleaning Sponge and proceed with cleaning the leather. Remove dirty foam with a slightly moist cloth. Our COLOURLOCK Leather Cleaning Brush will remove soiling from the depths of the grain (for best results, use a circular motion in all directions). You can also use the cleaning sponge contained in this kit. After cleaning or, in the case of recently treated or oily leather, degrease it using COLOURLOCK Leather Degreaser. Smooth out areas that have become rough due to wear with the COLOURLOCK sanding pad before dying. Then remove the sanding dust with a cloth moistened with degreaser.
Once the surface has been prepared, apply COLOURLOCK Leather Fresh to revitalise the leather's original colour on scratches, abrasions or slight fading (which are often found in vehicle seat side bolsters and furniture sitting areas). Apply the colour on a dried Surface only. Use a sponge to apply the colour evenly on the respective surfaces, working from seam to seam. Dry afterwards with a hair dryer. On small spots, one application is sufficient. Only treat surfaces where colour change is needed! If high opacity is desired, apply the colour in several layers and dry in-between layers with a hair dryer. The colour can be prepared according to our colour chart or send us a leather sample by post and we will mix it for you (an additional charge will apply for mixing colour according to a sample).
To maintain the top surface, we recommend our COLOURLOCK Leather Protector. It contains antioxidants, that stop the leather's decay, and UV filters to protect the surfaces from colour fading. It will also make the leather soft and supple once again. Use COLOURLOCK Leather Protector 24 hours after the colour refreshment. Apply with a soft cloth and let dry without polishing afterwards. One application is sufficient. Strained surfaces (heavy use or in sunlit areas) should be treated every three months. Clean before in case of soiling!
| Application: | Repair & Recolour |
|---|---|
| Application Area: | Bags & Cases, Car, Furniture, Leather Cloth, Steering Wheel |
| Leather Type: | Artificial leather, Pigmented leather |
Login
4 November 2021 00:00
It works!!
Color is spot on!!! Done in one morning!! Looks a lot better!!!!
26 June 2018 00:00
Professional Results from a Non-Professional
I ordered the repair kit consisting of mild cleaner, color repair and leather conditioner. The kit came with 2 sponge applicators and protective glove for applying the color dye to the leather surface. My project was my 2008 BMW interior which has begun losing color on sections of the seats and armrest over the past 10 years. Before starting, I cut both sponges in the kit in half - each measured 1” square by 2” long - making 4 1” cube applicators after cutting. My seats are perforated leather for A/C venting so I was careful to apply 4-5 very light coats as not to fill in the perforations. I followed the directions and couldn’t be happier with the results. I’m very picky with these things and I’m very please with the outcome. Follow the directions and apply thin coats of the product as you go. These are the results that I would expect if I had taken it to a professional upholstery shop.
3 July 2021 00:00
Highly recommended!
Works super good! Best product I ever used. Easy to use, does an amazing job. Made my seat looks like new and they are easier to keep clean!
28 June 2021 00:00
I got what they promised…
I had my BMW’s steering wheel in a very bad condition but after using this product it really recover its color and texture like new, I am very happy with the results.
6 June 2017 00:00
Perfect
Contact the company directly for a color swatch. Even though the swatches are printed on regular paper, it is very helpful.
11 January 2021 00:00
Opal White individual leather on ‘16 435i bmw
Good color match. Very hard to work with, but worth the effort. I’d say the product served its purpose.
20 April 2022 00:00
Kit needs the neutral binder
This is a good kit for even fairly torn up leather. It really should include a bottle of their neutral binder. The binder is used to stabilize a surface with a lot of little cracks. Every repair I’ve done needed some of the neutral binder, as it’s used right after cleaning and in some cases areas shouldn’t be clean order the neutral binder before you start your project.
12 June 2017 00:00
Worked just like advertised. I was more than satisfied with the ...
Worked just like advertised. I was more than satisfied with the results. The scratches the kitten left on our leather furniture are gone!
31 August 2019 00:00
Not as good as I expected
I used this product to clean 2 sofas and dye some peeled areas on them. My sofas were really dirty and the mild leather cleaner did a good job cleaning the leather, but after finishing the first sofa, I only had about a quarter of the bottle left to clean the second sofa.I was quite disappointed with the leather dye, I thought I could use it to dye several peeled spots and add a coat on the rest to enhance the color. It was not very good on peeled spots, the dye was too runny and there just wasn’t enough dye thickness in the liquid. I had to put at least 15 coats on peeled spots in order to blend them with the rest of the leather. Also it has been about 1 month since I applied the dye and some dyed spots are already showing cracks.
